Show Dvlan-Tunnel - Dell PowerEdge M420 Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example displays how to add all physical interfaces to the
protocol-based group identified by group ID "2."
console(config)#protocol vlan group all 2

show dvlan-tunnel

Use the show dvlan-tunnel command in Privileged EXEC mode to display all
interfaces enabled for Double VLAN Tunneling.
Syntax
show dvlan-tunnel
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display all interfaces for Double VLAN
Tunneling.
console#show dvlan-tunnel
Interfaces Enabled for DVLAN Tunneling......... 1/0/1
728
VLAN Commands