Traffic-Shape - Dell PowerEdge M420 Reference Manual

1/0/5 Down
1/0/6 Down
1/0/7 Down
1/0/8 Down
1/0/9 Down
1/0/10 Down

traffic-shape

Use the traffic-shape command in Global Configuration mode and Interface
Configuration mode to specify the maximum transmission bandwidth limit
for the interface as a whole. This process, also known as
effect of smoothing temporary traffic bursts over time so that the transmitted
traffic rate is bounded. To restore the default interface shaping rate value, use
the no form of this command.
Syntax
bw
traffic-shape
no traffic-shape
bw — Maximum transmission bandwidth value expressed in Kbps.
•
(Range: 64 - 4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
DELL
DELL
DELL
DELL
DELL
DELL
kbps
rate shaping
, has the
QoS Commands
651