Dell PowerEdge M420 Reference Manual page 484

Parameter
Rule Status
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays configuration information for the IPv6 ACLs.
console#show ipv6 access-lists
Current number of all ACLs: 1
IPv6 ACL Name
VLAN(s)
------------------------------- ----- --------- -------------------- -------
------
STOP_HTTP
console#show ipv6 access-lists STOP_HTTP
ACL Name: STOP_HTTP
Inbound Interface(s): 1/0/1
Rule Number: 1
Action......................................... deny
Protocol....................................... 255(ipv6)
Source IP Address.............................. 2001:DB8::/32
Destination L4 Port Keyword.................... 80(www/http)
Rule Number: 2
484
IPv6 Access List Commands
Description
Status (Active/Inactive) of the IPv6 ACL rule.
Maximum number of all ACLs: 100
Rules Direction
2
Interface(s)
inbound 1/0/1