Match Dstl4Port - Dell PowerEdge M420 Reference Manual

Example
console(config-classmap)#match dstip6 2001:DB8::/32

match dstl4port

Use the match dstl4port command in Class-Map Configuration mode to add
to the specified class definition a match condition based on the destination
layer 4 port of a packet using a single keyword or a numeric notation.
Syntax
match dstl4port {
portkey — Specifies one of the supported port name keywords. A match
•
condition is specified by one layer 4 port number. The currently supported
values are: domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, and
www.
port-number — Specifies a layer 4 port number (Range: 0–65535).
•
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition based on the
destination layer 4 port of a packet using the "echo" port name keyword.
console(config-classmap)#match dstl4port echo
portkey port-number
| }
QoS Commands
619