Mvr Vlan Group - Dell PowerEdge M420 Reference Manual

console(config-if-Gi1/0/1)#interface Gi1/0/24
console(config-if-Gi1/0/24)#switchport mode trunk
console(config-if-Gi1/0/24)#switchport trunk native vlan 99
console(config-if-Gi1/0/24)#switchport trunk allowed vlan add 99
console(config-if-Gi1/0/24)#mvr
console(config-if-Gi1/0/24)#mvr type source
console(config-if-Gi1/0/24)#exit

mvr vlan group

Use the mvr vlan group command in Interface Config mode to participate in
the specific MVR group. Use the no form of this command to remove the
port participation from the specific MVR group.
Syntax
mVLAN group A.B.C.D
mvr vlan
mVLAN group A.B.C.D
no mvr vlan
Parameter Description
Parameter
VLAN
A.B.C.D.
Default Configuration
This command has no default configuration.
Command Mode
Interface Config
Description
The VLAN over which multicast data from the specified group
is to be received.
The multicast group for which multicast data is to be received
over the specified VLAN.
Multicast VLAN Registration Commands
557