Capability Opaque; Clear Ip Ospf - Dell PowerEdge M420 Reference Manual

capability opaque

Use the capability opaque command to enable Opaque Capability on the
router. Use the "no" form of this command to disable Opaque Capability.
Syntax
capability opaque
no capability opaque
Default Configuration
Opaque Capability is enabled by default.
Command Mode
Router Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-router)#capability opaque

clear ip ospf

Use the clear ip ospf command to reset specific OSPF states. If no
parameters are specified, OSPF is disabled and then re-enabled.
Syntax
clear ip ospf [ { configuration | redistribution | counters | neighbor [
interface vlan
• configuration — Reset the OSPF configuration to factory defaults.
• redistribution — Flush all self-originated external LSAs. Reapply the
redistribution configuration and re originate prefixes as necessary.
• counters — Reset global and interface statistics.
1088
OSPF Commands
vlan id neighbor id
[ ] ] } ]