console(config-CP 2)#group 2
Use the interface command to associate an interface with a captive portal
configuration. Use the "no" form of this command to remove an association.
—An interface or range of interfaces.
No interfaces are associated with a configuration by default.
Captive Portal Instance Config mode.
There are no user guidelines for this command.
console(config-CP 2)#interface 1/0/2
The locale command is not intended to be a user command. The
administrator must use the Web UI to create and customize captive portal
web content. This command is primarily used by the show running-config
command and process as it provides the ability to save and restore
configurations using a text based format.
Captive Portal Commands