Show Captive-Portal Configuration; Captive Portal Status Commands - Dell PowerEdge M420 Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#user 1 session-timeout 86400
console(config-CP)#no user 1 session-timeout

Captive Portal Status Commands

show captive-portal configuration

Use the show captive-portal configuration command to display the
operational status of each captive portal configuration.
Syntax
cp-id
show captive-portal configuration
cp-id
—Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1
CP ID..................................... 1
CP Name................................... cp1
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
Blocked Status............................ Not Blocked
1297
Captive Portal Commands