Lacp Timeout - Dell PowerEdge M420 Reference Manual

Syntax
lacp system-priority
no lacp system-priority
value — Port priority value. (Range: 1–65535)
•
Default Configuration
The default system priority value is 1.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the system priority to 120.
console(config)#lacp system-priority 120

lacp timeout

Use the lacp timeout command in Interface Configuration mode to assign an
administrative LACP timeout. To reset the default administrative LACP
timeout, use the no form of this command.
Syntax
lacp timeout {long | short}
no lacp timeout
• long — Specifies a long timeout value.
• short — Specifies a short timeout value.
Default Configuration
The default port timeout value is long.
584
Port Channel Commands
value