profile-wireless, the interface configuration, used when connecting the
switch and a wireless access point.
Commands in this Chapter
This chapter explains the following commands:
macro global apply
macro global trace
macro global description
Use the macro name command in Global Configuration mode to create a
user-defined macro. Use the no form of the command to delete a macro.
no macro name
The following macros are defined by default and may not be deleted or
CLI Macro Commands
The name of the macro. A macro name can consist of any
printable characters, including blanks. A macro name may be
up to 31 characters in length. Embed the name in quotes if a
blank is desired in the name. Use the no form of the command
to delete a macro.
show parser macro