Show Vrrp Interface Stats - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
virtual router on the selected interface.
console#show vrrp interface brief
Interface VRID IP Address
--------- ---- -------------- ------
vlan1
vlan2

show vrrp interface stats

Use the show vrrp interface stats command in User EXEC mode to display
the statistical information about each virtual router configured on the switch.
Syntax
show vrrp interface stats vlan
vlan-id — Valid VLAN ID.
vr-id — The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
1256
Virtual Router Redundancy Protocol Commands
2
0.0.0.0
5
192.168.5.55
vlan-id vr-id
Mode
State
------------
Disable Initialize
Enable
Initialize

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents