Dell PowerEdge M420 Reference Manual page 1379

Syntax
number-of-commands
history size
no history size
Parameter Description
Parameter
number-of-
commands
Default Configuration
The default command history buffer size is 10.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the command history buffer size to 20
commands for the current terminal session.
console(config-line)#history size 20
line
Use the line command in Global Configuration mode to identify a specific
line for configuration and enter the line configuration command mode.
Syntax
line {console | telnet | ssh}
• console — Console terminal line.
• telnet — Virtual terminal for remote console access (Telnet).
• ssh — Virtual terminal for secured remote console access (SSH).
Description
Specifies the number of commands the system may record in its
command history buffer. (Range: 0-216)
Line Commands
1375