Mvr Vlan; Mvr Immediate - Dell PowerEdge M420 Reference Manual

mvr vlan

Use the mvr vlan command in Global Config mode to set the MVR multicast
VLAN. Use the no form of the command to set the MVR multicast VLAN to
the default value.
Syntax
1–4094
mvr vlan
no mvr vlan
Parameter Description
Parameter
vlan
Default Configuration
The default value is 1.
Command Mode
Global Config
User Guidelines
The following table lists the completion messages.
Message Type
Successful Completion Message
Error Completion Message

mvr immediate

Use the mvr immediate command in Interface Config mode to enable MVR
Immediate Leave mode. Use the no form of this command to set the MVR
multicast VLAN to the default value.
554
Multicast VLAN Registration Commands
Description
The VLAN specifies the port on which multicast data is
expected to be received. Source ports should belong to this
VLAN.
Message Description
MVR multicast VLAN ID is set to the
default value which is equal to 1.
Receiver port in mVLAN, operation failed.