Show Ip Pim Neighbor - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Designated Router
If none of the interfaces are enabled for PIM, the following message is
displayed:
None of the routing interfaces are enabled for PIM

show ip pim neighbor

Use the show ip pim neighbor command in User EXEC or Privileged EXEC
modes to display PIM neighbors discovered by PIMv2 Hello messages. If the
interface number is not specified, this command displays the neighbors
discovered on all the PIM-enabled interfaces.
Syntax
show ip pim neighbor [ vlan
vlan-id — A valid VLAN ID for which multicast routing has been enabled.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Field Descriptions
Field
Neighbor Addr
Interface
Uptime
Expiry Time
vlan-id
Description
IP address of the PIM neighbor
Interface number
Time since the neighbor is learned
Time remaining for the neighbor to expire
192.168.10.1
]
Multicast Commands
1043

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents