Rmon Collection History - Dell PowerEdge M420 Reference Manual

rmon collection history

Use the rmon collection history command in Interface Configuration mode
to enable a Remote Monitoring (RMON) MIB history statistics group on an
interface. To remove a specified RMON history statistics group, use the no
form of this command. Also see the show rmon collection history command.
Syntax
rmon collection history
seconds
[interval
no rmon collection history
index — The requested statistics index group. (Range: 1–65535)
•
ownername — Records the RMON statistics group owner name. If
• owner
unspecified, the name is an empty string.
bucket-number — A value associated with the number of buckets
• buckets
specified for the RMON collection history group of statistics. If
unspecified, defaults to 50. (Range: 1 - 65535)
seconds — The number of seconds in each polling cycle. If
• interval
unspecified, defaults to 1800. (Range: 1–3600)
Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode.
User Guidelines
This command cannot be executed on multiple ports using the interface
range command.
Example
The following example enables a Remote Monitoring (RMON) MIB history
statistics group on port 1/0/8 with the index number "1" and a polling interval
period of 2400 seconds.
1416
RMON Commands
index
[owner
]
index
ownername
] [buckets
bucket-number
]