Ip Address (Out-Of-Band) - Dell PowerEdge M420 Reference Manual

console(config-if)#

ip address (Out-of-Band)

Use the ip address command in Interface Configuration mode to set an IP
address for the service port. Use the no form of this command to return the ip
address configuration to its default value.
Syntax
ip-address
ip address {
no ip address
Parameter Description
Parameter
ip-address
mask
prefix-length
dhcp
Default Configuration
The out-of-band interface (service port) obtains an IP address via DHCP by
default.
Command Mode
Interface (Out-of-Band) Configuration mode
462
IP Addressing Commands
mask prefix-length
{ |
Description
Specifies a valid IP address.
Specifies a valid subnet (network) mask IP address.
The number of bits that comprise the IP address prefix. The
prefix length must be preceded by a forward slash (/). (Range: 1-
30 bits)
Obtain the service port address via DHCPv4.
} | dhcp}