Classofservice Ip-Dscp-Mapping - Dell PowerEdge M420 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration or Interface Configuration (Ethernet, Port-channel)
mode
User Guidelines
None
Example
The following example configures mapping for user priority 1 and traffic class
2.
console(config)#classofservice dot1p-mapping 1 2

classofservice ip-dscp-mapping

Use the classofservice ip-dscp-mapping command in Global Configuration
mode to map an IP DSCP value to an internal traffic class.
Syntax
classofservice ip-dscp-mapping
ipdscp — Specifies the IP DSCP value to which you map the specified
•
traffic class. (Range: 0–63 or an IP DSCP keyword – af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5,
cs6, cs7, ef)
trafficclass — Specifies the traffic class for this value mapping. (Range:
•
0–6)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
ipdscp trafficclass
QoS Commands
605