Ipv6 Nd Ra-Interval - Dell PowerEdge M420 Reference Manual

console(config)#interface vlan 11
console(config-if-vlan11)#ipv6 nd prefix 2020:1::1/64

ipv6 nd ra-interval

Use the ipv6 nd ra-interval command in Interface Configuration mode to set
the transmission interval between router advertisements.
Syntax
ipv6 nd ra-interval
no ipv6 nd ra-interval
maximum — The maximum interval duration (Range: 4–1800 seconds).
•
minimum — The minimum interval duration (Range: 3 – (0.75 *
•
maximum) seconds).
Default Configuration
600 is the default value for
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
The minimum interval cannot be larger than 75% of the maximum interval.
Example
The following example sets the transmission interval between router
advertisements at 1000 seconds.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd ra-interval 1000
maximum minimum
seconds
.
IPv6 Routing Commands
977