Show Ip Igmp-Proxy - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

show ip igmp-proxy

Use the show ip igmp-proxy command in Privileged EXEC mode to display a
summary of the host interface status parameters. It displays status parameters
only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary of the host interface status
parameters.
console#show ip igmp-proxy
Interface Index............................... vlan13
Admin Mode.................................... Enable
Operational Mode.............................. Enable
Version....................................... 3
Number of Multicast Groups.................... 0
Unsolicited Report Interval................... 1
Querier IP Address on Proxy Interface......... 0.0.0.0
Older Version 1 Querier Timeout............... 0
Older Version 2 Querier Timeout............... 0
892
IGMP Proxy Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents