Phy Diagnostics Commands; Show Copper-Ports Tdr; Test Copper-Port Tdr - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

PHY Diagnostics Commands

This chapter explains the following commands:

show copper-ports tdr

show fiber-ports optical-transceiver
show copper-ports tdr
Use the show copper-ports tdr command in Privileged EXEC mode to display
the stored information regarding cable lengths.
Syntax
show copper-ports tdr [
interface — A valid Ethernet port. The full syntax is unit / port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The copper-related commands do not apply to the stacking, CX-4, or
10GBaseT ports associated with these plug-in modules.
The maximum length of the cable for the Time Domain Reflectometry
(TDR) test is 120 meters. Disable green-mode on the port in order to obtain
accurate results.

test copper-port tdr

interface
]
PHY Diagnostics Commands
72
1409

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents