Show Ip Igmp Membership - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Startup Query Interval (secs) ................. 31
Startup Query Count............................ 2
Last Member Query Interval (1/10 of a second).. 10
Last Member Query Count........................ 2

show ip igmp membership

Use the show ip igmp membership command in Privileged EXEC mode to
display the list of interfaces that have registered in the multicast group. If
detail is specified, this command displays detailed information about the
listed interfaces.
Syntax
groupaddr ] [detail]
show ip igmp membership [
groupaddr — Group IP address
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Examples
The following examples display the list of interfaces that have registered in
the multicast group at IP address 224.5.5.5, the latter in detail mode.
console#show ip igmp interface membership 224.5.5.5
console(config)#show ip igmp interface membership 224.5.5.5 detail
885
IGMP Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents