User EXEC, Privileged EXEC mode
The following fields are displayed:
console#show ip pimsm rp hash 126.96.36.199
If no RP Group mapping exists on the router, the following message is
No RP-Group mappings exist/learned on this router.ny
show ip pim rp mapping
The show ip pim rp mapping command is used in User EXEC and Privileged
EXEC modes to display the mappings for the PIM group to the active
rendezvous points. This command deprecates the show ip pimsm rp
candidate, show ip pimsm staticrp, show ip pimsm rp mapping commands.
show ip pim rp mapping [
— An RP address.
There is no default configuration for this command.
Address of the RP
Origin from where this group mapping was learned.