Show Captive-Portal Configuration Interface - Dell PowerEdge M420 Reference Manual

Configured Locales........................ 1
Authenticated Users....................... 0

show captive-portal configuration interface

Use the show captive-portal configuration interface command to display
information about all interfaces assigned to a captive portal configuration or
about a specific interface assigned to a captive portal configuration.
Syntax
cp-id
show captive-portal configuration interface [{gigabitethernet
unit/slot/port unit/slot/port
| tengigabitethernet
}]
cp-id —Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Operational Block
Interface Interface Description Status
Status
--------- ---------------------------------------- ------------ ---
------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level Disabled
Blocked
1298
Captive Portal Commands