Timers Spf - Dell PowerEdge M420 Reference Manual

Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information in
the system.
console#show ipv6 ospf virtual-link brief
Area ID Neighbor
------- --------
0.0.0.2 5.5.5.5

timers spf

Use the timers spf command in Router OSPF Configuration mode to
configure the SPF delay and hold time. Use the no form of the command to
reset the numbers to the default value.
Syntax
delay-time hold-time
timers spf
no timers spf
delay-time — SPF delay time. (Range: 0–65535 seconds)
•
hold-time — SPF hold time. (Range: 0–65535 seconds)
•
1140
OSPF Commands
Hello Dead
Interval Interval Interval
-------- -------- ----------
10 40
Retransmit Transit
Delay
-------
5 1