Sntp Authenticate - Dell PowerEdge M420 Reference Manual

User Guidelines
This command has no user guidelines.
Examples
The following example shows the status of the SNTP .
console#show sntp status
Client Mode:
Last Update Time:
Unicast servers:
Server
---------
192.168.0.1

sntp authenticate

Use the sntp authenticate command in Global Configuration mode to
require server authentication for received Network Time Protocol (NTP)
traffic. To disable the feature, use the no form of this command.
Syntax
sntp authenticate
no sntp authenticate
Default Configuration
No authentication.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both Unicast and Broadcast.
1320
Clock Commands
Status
-----------
Up
Unicast
MAR 30 21:21:20 2009
Last response
--------------------------
21:21:20 Mar 30 2009