Captive Portal Interface Commands
show captive-portal interface configuration
status
Use the show captive-portal interface configuration status command to
display the interface to configuration assignments for all captive portal
configurations or for a specific configuration.
Syntax
cp-id
show captive-portal interface configuration [
] status
cp-id —Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal interface configuration status
CP ID
CP Name
Interface
Interface Description
Type
----- ------------------ --------- ----------------------------------- -----
---
1
Default
1/0/1
Unit: 1 Slot: 0 Port: 1 Gigabit .. Physical
console#show captive-portal interface configuration 1 status
CP ID..................................... 1
CP Name................................... cp1
Interface
Interface Description
Type
--------- ----------------------------------- --------
1/0/1
Unit: 1 Slot: 0 Port: 1 Gigabit ... Physical
1290
Captive Portal Commands