Dell PowerEdge M420 Reference Manual page 1381

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Example
The following example displays the line configuration.
console>show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
speed
Use the speed command in Line Configuration mode to set the line baud
rate. Use the no form of the command to restore the default settings.
Syntax
bps
speed {
}
no speed
bps — Baud rate in bits per second (bps). The options are 2400, 9600,
19200, 38400, 57600, and 115200.
Default Configuration
This default speed is 9600.
Line Commands
1377

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents