Sntp Authentication-Key - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Example
The following example, after defining the authentication key for SNTP, grants
authentication.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate

sntp authentication-key

Use the sntp authentication-key command in Global Configuration mode to
define an authentication key for Simple Network Time Protocol (SNTP). To
remove the authentication key for SNTP, use the no form of this command.
Syntax
sntp authentication-key
no sntp authentication-key
key-number — number (Range: 1–4294967295)
value — value (Range: 1-8 characters)
Default value
No authentication is defined.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Examples
The following examples define the authentication key for SNTP.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
key-number
md5
number
value
Clock Commands
1321

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents