Ip Igmp-Proxy Unsolicited-Report-Interval - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Example
The following example resets the host interface status parameters of the
IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy reset-status

ip igmp-proxy unsolicited-report-interval

Use the ip igmp-proxy unsolicited-report-interval command in Interface
Configuration mode to set the unsolicited report interval for the IGMP Proxy
router. This command is valid only if IGMP Proxy on the interface is enabled.
Syntax
seconds
ip igmp-proxy unsolicited-report-interval
seconds — Unsolicited report interval. (Range: 1-260 seconds)
Default Configuration
The default configuration is 1 second.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets 10 seconds as the unsolicited report interval for
the IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy unsolicited-
report-interval 10
891
IGMP Proxy Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents