Ipv6 Pim Rp-Address - Dell PowerEdge M420 Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim register-rate-limit 10

ipv6 pim rp-address

Use the ipv6 pim rp-address command to define the address of a PIM
Rendezvous Point (RP) for a specific multicast group range. Use the no form
of this command to remove a configured RP .
Syntax
ipv6 pim rp-address {
no ipv6 pim rp-address {
Parameter Description
Parameter
rp-address
group-address
group-mask
override
Default Configuration
None - There are no static multicast groups configured for an RP.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
946
IPv6 PIM Commands
rp-address group-address group-mask
rp-address group-address group-mask
Description
The valid IPv6 address for the Rendezvous Point.
A valid multicast group address to be sourced from the
Rendezvous Point.
A mask indicating the range of multicast groups sourced from
the RP .
A flag indicating that a static entry should override dynamically
learned entries for the configured multicast group.
[ override ]}
}