Show Ip Ospf Statistics - Dell PowerEdge M420 Reference Manual

Syntax
show ip ospf range
area-id — Identifies the OSPF area whose ranges are being displayed.
•
(Range: IP address or decimal from 0–4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for the
specified area-id.
console#show ip ospf range 20
Area ID IP Address
------- ----------
0.0.0.20 192.168.6.0 255.255.255.0 Summary Link Enabled

show ip ospf statistics

This command displays information about recent Shortest Path First (SPF)
calculations. The SPF is the OSPF routing table calculation. The output lists
the number of times the SPF has run for each OSPF area. A table follows this
information. For each of the 15 most recent SPF runs, the table lists how long
ago the SPF ran, how long the SPF took, and the reasons why the SPF was
scheduled.
Syntax
show ip ospf statistics
1136
OSPF Commands
area-id
Subnet Mask
---------
Lsdb Type Advertisement
--------- -------------