Ipv6 Mtu - Dell PowerEdge M420 Reference Manual

no ipv6 mld router
Default Configuration
MLD is disabled by default.
Command Mode
Global Configuration mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld router

ipv6 mtu

Use the ipv6 mtu command in Interface Configuration mode to set the
maximum transmission unit (MTU) size, in bytes, of IPv6 packets on an
interface. This command replaces the default MTU with a new MTU value.
Syntax
bytes
ipv6 mtu <
no ipv6 mtu
Parameter Description
Parameter
bytes
Default Configuration
The default MTU is 1500.
>
Description
The maximum transmission size of an IPv6 frame. (Range:
1280-1500)
IPv6 Routing Commands
971