The command has no default configuration.
Global Configuration mode
This command has no user guidelines.
console#ip dhcp ping packets 5
Use the lease command in DHCP Pool Configuration mode to set the period
for which a dynamically assigned DHCP address is valid. Use the infinite
parameter to indicate that addresses are to be automatically assigned. Use the
no form of the command to return the lease configuration to the default. Use
the show ip dhcp pool command to display pool configuration parameters.
Use the show ip dhcp binding command to display the expiration time of the
leased IP address.
The number of ping packets sent to detect an address in use.
The default is 2 packets. Range 0, 2-10. A value of 0 turns off
address detection. Use the no form of the command to return
the setting to the default value.
DHCP Server and Relay Agent Commands