Passwords Strength Exclude-Keyword - Dell PowerEdge M420 Reference Manual

performed, i.e. for special characters, uppercase characters, lower-case
characters, etc. Use the no form of this command to reset the minimum
character-classes to the default value.
Syntax
0-4
passwords strength minimum character-classes
no passwords strength minimum character–classes
Parameter Description
This command does not require parameter descriptions.
Default Behavior
The default value is 1.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
Example
console(config)#passwords strength minimum character-
classes 4

passwords strength exclude-keyword

Use this command to exclude the keyword while configuring the password.
The password does not accept the keyword in any form (inbetween the string,
case insensitive and reverse) as a substring. You can configure up to a
maximum of three keywords. Use the no form of this command to reset the
restriction for a given string or all the strings configured.
Syntax
string
passwords strength exclude–keyword
string ]
no passwords strength exclude–keyword [
1402
Password Management Commands