Classofservice Dot1P-Mapping - Dell PowerEdge M420 Reference Manual

classname — The name of an existing DiffServ class. (Range: 1–31
•
characters)
newclassname — A case-sensitive alphanumeric string. (Range: 1–31
•
characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to change the name of a DiffServ class
from "DELL" to "DELL1."
console(config)#class-map rename DELL DELL1
console(config)#

classofservice dot1p-mapping

Use the classofservice dot1p-mapping command in Global Configuration
mode to map an 802.1p priority to an internal traffic class. In Interface
Configuration mode, the mapping is applied only to packets received on that
interface. Use the no form of the command to remove mapping between an
802.1p priority and an internal traffic class.
Syntax
classofservice dot1p-mapping
no classofservice dot1p-mapping
802.1ppriority — Specifies the user priority mapped to the specified traffic
•
class for this switch. (Range: 0–7)
trafficclass — Specifies the traffic class for this switch. (Range: 0–6)
•
604
QoS Commands
802.1ppriority trafficclass