Vrrp Ip - Dell PowerEdge M420 Reference Manual

User Guidelines
Descriptions containing spaces must be wrapped with quotes.
Example
The following example creates virtual router group 5 on VLAN 15 and
configures its description.
console(config)#interface vlan 15
console(config-if-vlan15)#vrrp 5
console(config-if-vlan15)#vrrp 5 description "Sales
and Marketing"

vrrp ip

Use the vrrp ip command in Interface Configuration mode to enable VRRP
and set the virtual router IP address value for an interface. Use the no form of
the command remove the secondary IP address. It is not possible to remove
the primary IP address once assigned. Remove the VRRP group instead.
Syntax
group ip-address
vrrp ip
group
no vrrp ip
Syntax Description
Parameter
group
ip-address
secondary
Default Configuration
VRRP is not configured on the interface.
[secondary]
ip-address
vlan secondary
Description
The virtual router identifier. (Range: 1-255)
The IP address of the virtual router.
Designates the virtual router IP address as a secondary IP
address on an interface.
Virtual Router Redundancy Protocol Commands
1241