Dell PowerEdge M420 Reference Manual page 1402

User Guidelines
This command has no user guidelines.
Example
console(config)#passwords strength minimum lowercase-
letters 6
passwords strength minimum numeric-
characters
Use this command to enforce a minimum number of numeric numbers that a
password should contain. The valid range is 0–16. The default is 1. A
minimum of 0 means no restriction on that set of characters. Use the no form
of this command to reset the minimum numeric characters to the default
value.
Syntax
0–16
passwords strength minimum numeric–characters
no passwords strength minimum numeric–characters
Parameter Description
This command does not require parameter descriptions.
Default Behavior
The default value is 1.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
1398
Password Management Commands