Gmrp Commands - Dell PowerEdge M420 Reference Manual

GMRP Commands

The GARP Multicast Registration Protocol provides a mechanism that allows
networking devices to dynamically register (and de-register) Group
membership information with the MAC networking devices attached to the
same segment, and for that information to be disseminated across all
networking devices in the bridged LAN that support Extended Filtering
Services. The operation of GMRP relies upon the services provided by the
Generic Attribute Registration Protocol (GARP). GMRP is supported as
described below.
The information registered, de-registered and disseminated via GMRP is in
the following forms:
1 Group Membership information: This indicates that there exists one or
more GMRP participants which are members of a particular Group, and
carry the group MAC addresses associated with the Group.
2 Group service requirements information: This indicates that one or more
GMRP participants require Forward all Groups or Forward Unregistered to
be the default filtering behavior.
NOTE: The Group Service requirement is not supported.
Registration of group membership information allow networking devices to
be made aware that frames destined for that group MAC address concerned
should be forwarded in the direction of registered members of the group.
Forwarding of frames destined for that group MAC address occur on ports on
which such membership registration has been received.
Registration of group services requirement information allow networking
devices to be made aware that any of their ports that can forward frames in
the direction from which the group service requirement information has been
received should modify their default group behavior in accordance with the
group service requirement expressed.
NOTE: The Group Service requirement is not supported.
44
GMRP Commands
869