delete backup-config
delete backup-image
delete startup-config
dir
erase
boot system
Use the boot system command in Privileged EXEC mode to specify the
system image that the device loads at startup.
Syntax
boot system [unit-id][image1 | image2]
•
image1 | image2 — Image file.
Parameter Description
Parameter
image1
image2
unit
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
1340
Configuration and Image File Commands
Description
Marks the given image as active for subsequent reboots.
Marks the given image as active for subsequent reboots.
Unit to be used for this operation. If absent, command executes
on this node.
show running-config
show startup-config
write