Ipv6 Pimsm Register-Threshold - Dell PowerEdge M420 Reference Manual

Syntax
ipv6 pimsm join-prune-interval interval
no ipv6 pimsm join-prune-interval
• interval— The join/prune interval (Range: 0–18000 seconds).
Default Configuration
The default join/prune interval is 60 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm join-prune-
interval 90

ipv6 pimsm register-threshold

Use the ipv6 pimsm register-threshold command to configure the Register
Threshold rate for the RP router to switch to the shortest path. Use the "no"
form of this command to set the register threshold rate to the default.
Syntax
ipv6 pimsm register-threshold
no ipv6 pimsm register-threshold
• threshold—The threshold rate (Range: 0–2000 Kbps).
Default Configuration
The default threshold rate is 0.
Command Mode
Global Configuration mode
1054
IPv6 Multicast Commands
threshold