Use the macro description command in Interface Configuration mode to
append a line to the macro description. Use the no form of the command to
clear the description.
There is no description by default.
Interface Configuration mode
This command is intended to give the administrator an easy way to remember
which macros have been applied to an interface. All text up to the new line is
included in the description. The line is appended to the interface description.
show parser macro
Use the show parser macro command in Privileged EXEC mode to display
information about defined macros.
show parser macro [brief | description [interface
CLI Macro Commands
The macro description. All text up to the new line is included in
] | name