Service Dhcpv6 - Dell PowerEdge M420 Reference Manual

FILE LOCATION: C:\My Documents\ActiveProjects\2CSPC7000-SWUM400 Dell Zeiss CLI
Guide\working\DHCPv6.fm
The following example defines a unique local address prefix with the MAC
address 00:1D:BA:06:37:64 converted to EUI-64 format and a preferred
lifetime of 5 days.
console(config-dhcp6s-pool)#prefix-delegation
fc00::/7 00:1D:BA:FF:FE:06:37:64 preferred-lifetime
43200

service dhcpv6

Use the service dhcpv6 command in Global Configuration mode to enable
local IPv6 DHCP server on the switch. Use the no form of the command to
disable the DHCPv6 service.
Syntax
service dhcpv6
no service dhcpv6
Default Configuration
The service dhcpv6 is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables DHCPv6 globally.
console#configure
console(config)#service dhcpv6
console(config)#no service dhcpv6
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 0 / 1 1 - F O R P R O O F O N LY
850
DHCPv6 Commands