Ip Igmp Query-Max-Response-Time - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Example
The following example configures a 10-second query interval for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp query-interval 10

ip igmp query-max-response-time

Use the ip igmp query-max-response-time command in Internet
Configuration mode to configure the maximum response time interval for
the specified interface. It is the maximum query response time advertised in
IGMPv2 queries on this interface. The time interval is specified in seconds.
Syntax
seconds
ip igmp query-max-response-time
no ip igmp query-max-response-time
seconds — Maximum response time. (Range: 0-25 seconds)
Default Configuration
The default maximum response time value is 10 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a maximum response time interval of one
second for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp query-max-response-
time 10
878
IGMP Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents