Show Ip Protocols - Dell Force10 MXL Blade Reference Manual

Command Modes
Command
History
Example

show ip protocols

Syntax
Command Modes
Command
History
Example
314 | IPv4 Routing
summary
static
EXEC
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 15-15. show ip management route Command Example
FTOS#show ip management-route
Destination Gateway
----------- -------
10.1.2.0/24 ManagementEthernet 0/0
172.16.1.0/24 10.1.2.4
FTOS#
View information on all routing protocols enabled and active on the switch.
show ip protocols
EXEC
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 15-16. show ip protocols Command Example
FTOS#show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
FTOS#
(OPTIONAL) Enter the keyword
of active and non-active routes and their sources.
(OPTIONAL) Enter the keyword
summary
to view a table listing the number
static
to view non-active routes also.
State
-----
Connected
Active