Show Ethernet Cfm Maintenance-Points Remote - Dell PowerEdge M420 Reference Manual

Syntax
show ethernet cfm maintenance-points local {level
id domain-name
| domain
Parameter Description
Parameter
domain
level
interface-id
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
show ethernet cfm maintenance-points local level 1
---- ----- ---- ---- ------ ----- -------- ------ ----------- ---------
MPID Level Type VLAN
---- ----- ---- ---- ------ ----- -------- ------ ----------- ---------
1 1 MEP
----- ---- ------ -----------------
Level Type Port
----- ---- ------ -----------------

show ethernet cfm maintenance-points remote

Use the show ethernet cfm maintenance-points remote command in
Privileged EXEC mode to display the configured remote maintenance points.
420
Ethernet CFM Commands
}
Description
Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
Maintenance association level
Show all MPs associated with the interface.
Port Dire-
ction Transmit Active
10 1/0/1 UP
MAC
CC MEP- Operational
Enabled True
0-7 interface-
| interface
MAC
Status
00:02:bc:02:02:02