Show Interfaces Configuration - Dell PowerEdge M420 Reference Manual

Admin Local Link ------ ------ ------ ------ ------
Advertisement yes

show interfaces configuration

Use the show interfaces configuration command in User EXEC mode to
display the configuration for all configured interfaces.
Syntax
show interfaces configuration [{gigabitethernet
port-channel-number | tengigabitethernet unit/slot/port }]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no use guidelines.
Example
The following example displays the configuration for all configured
interfaces:
console>show interfaces configuration
Port Type
----- ------------------------------
1/0/1 Gigabit - Level
1/0/2 Gigabit - Level
1/0/3 Gigabit - Level
1/0/4 Gigabit - Level
1/0/5 Gigabit - Level
380
Ethernet Configuration Commands
yes yes
Duplex
------
yes no
unit/slot/port
| port-channel
Speed
-------
Full 100
N/A Unknown
N/A Unknown
N/A Unknown
N/A Unknown
Neg Admin
State
---- -----
Auto Up
Auto Up
Auto Up
Auto Up
Auto Up