Show Interfaces Description - Dell PowerEdge M420 Reference Manual

Field
Late Collisions
Excessive Collisions
Oversize Packets
Internal MAC Rx Errors A count of frames for which reception fails due to an
Received Pause Frames A count of MAC Control frames received with an opcode
Transmitted Pause
Frames

show interfaces description

Use the show interfaces description command in User EXEC mode to
display the description for all configured interfaces.
Syntax
show interfaces description [gigabitethernet
port-channel-number | tengigabitethernet unit/slot/port ]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for all interfaces.
Description
Counted times that a collision is detected later than one
slot time into the transmission of a packet.
Counted frames for which transmission fails due to
excessive collisions.
Counted frames received that exceed the maximum
permitted frame size.
internal MAC sublayer receive error.
indicating the PAUSE operation.
Counted MAC Control frames transmitted on this
interface with an opcode indicating the PAUSE operation.
Ethernet Configuration Commands
unit/slot/port
| port-channel
385