show storm-control
Use the show storm-control command in Privileged EXEC mode to display
the configuration of storm control.
Syntax
show storm-control [all | {gigabitethernet
tengigabitethernet
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example shows storm control configurations for all valid
Ethernet ports. The second example shows flow control mode status.
console#show storm-control all
Bcast
Intf
Mode
------ ------- ------- ------- ------- ------- -------
1/0/1
Disable 5
1/0/2
Disable 5
1/0/3
Disable 5
1/0/4
Disable 5
console#show storm-control
802.3x Flow Control Mode.................... Disable
unit/slot/port
}]
Bcast
Mcast
Level
Mode
Disable 5
Disable 5
Disable 5
Disable 5
unit/slot/port
Mcast
Level
Ethernet Configuration Commands
|
Ucast
Ucast
Mode
Level
Disable 5
Disable 5
Disable 5
Disable 5
397