Ethernet Cfm Mep Enable - Dell PowerEdge M420 Reference Manual

Command Mode
Interface Configuration
User Guidelines
This command has no user guidelines.
Example
The following example creates a maintenance endpoint at level 1 with mpid
1010 on vlan 10.
console(config-if-Gi1/0/3)#ethernet cfm mep level 1
direction up mpid 1010 vlan 10

ethernet cfm mep enable

Use the ethernet cfm mep enable command in Interface Configuration mode
to enable a MEP at the specified level and direction. Use the no form of the
command to disable the MEP .
Syntax
ethernet cfm mep enable level
Parameter Description
Parameter
level
mpid
vlan
Default Configuration
No MEPs are preconfigured.
Command Mode
Interface Configuration
412
Ethernet CFM Commands
0-7
vlan
Description
Maintenance association level
Maintenance entity identifier
VLAN on which the MEP operates
1-4093 1-8191
mpid