Ping Ethernet Cfm - Dell PowerEdge M420 Reference Manual

Syntax
ethernet cfm mip level
Parameter Description
Parameter
level
Default Configuration
No MIPs are preconfigured.
Command Mode
Interface Configuration
User Guidelines
This command has no user guidelines.
Example
console(config-if-gi1/0/1)# ethernet cfm mip level <7>

ping ethernet cfm

Use the ping ethernet cfm command in Privileged EXEC mode to generate a
loopback message (LBM) from the configured MEP .
Syntax
ping ethernet cfm {mac
name 0-7
| level
Parameter Description
Parameter
level
0-7
Description
Maintenance association level
mac-addr
vlan-id
} vlan mpid
Description
Maintenance association level
1-8191
| remote-mpid
1-8191
[count
Ethernet CFM Commands
domain
} {domain
1-255
]
415